Home › Who it's for › Service providers

For service providers and distributors

Show customers what their system is really doing, from the data, and back every recommendation with the logged minutes that prove it.

Where it gets hard

A proposal for a new compressor, dryer or controls gets doubted unless the customer can see the data behind it.

Technicians collect the data, but turning it into a report waits on the one engineer who knows how.

Units fighting, short-cycling, wrong setpoints and dryers that never shut off look fine on paper and only show up in the logs.

A clear field routine. A one-page field sheet tells technicians what to collect, and the site setup guide says what is still missing.
Which units should run at each demand. Compared against the plant's real demand, within each motor's start limits, with what each arrangement would save.
Problems no one entered. Controls, dryers, filters, drains, leaks and purge, trips and ride-through, found in the data even when they're not on the equipment list.
Evidence the customer can see. Every recommendation points back to the logged minutes that prove it, and health cases come with a troubleshooting checklist.
Your name on it. Reports branded with your company's name and logo, every issued report kept, and a dashboard across all your sites.

Master controls, built-in sequencing or cloud controls: which fits your customer.

A quick number to start the conversation with a customer.

Two pages on what CAS ASSiST finds and how it works.

See it on a customer's system.A guided demo on sample data, or on logs from one of your own sites.